Activant Dimensions Getting Started Download Page 21

Page: 21 / 490

Chapter 1. Hardware Training

UPS (Uninterrupted Power Supply)

This is the battery backup for the CPU. In case of power failure, the UPS will

provide uninterrupted power to the computer for a specified length of time so

valuable data will not be lost. It provides enough time to appropriately shut down

the computer if needed.

Dimensions of a typical UPS
5.50" high
10.00" wide
16.00" deep

Modem

This is an electronic device that connects the computer with a telephone line

allowing the computer to communicate with a remote location terminal. It

actually stands for MOdulate/DEModulate, a term describing its function.

Modems are peripheral devices requiring a port to the computer.

Dimensions of modem
2.00" high
6.00" wide
9.00" deep

A/B

Switch

This is a switching device that allows one port to be shared, for example, between

a terminal and a modem. When the switch is turned to A, it functions as a

terminal. When it is turned to B, it functions as a modem. Sometimes it is

necessary to have an A/B/C or A/B/C/D switch. It is usually port #2.

Dimensions of a typical
2.50" high
6.00" wide
5.50" deep

A
B

Front View

Rear View

Input-Output

Dimensions 14

Summary of Contents for Dimensions











































































































































































































































































































































































































































































































Search results

Summary of Contents for Dimensions

Reviews:

Activant Dimensions, Getting Started, Page: 21 / 490

Search results

Summary of Contents for Dimensions

Reviews: