Abbott CELL-DYN 3000, Troubleshooting Manual

Page: 14 / 296

28 Oct
1997 20:45
CELL-DYN
®
3/35 Sample Loader TS Guide 9140234B-June 1997
TROUBLESHOOTING 1.2 ERROR MESSAGES 1 - 5
1
Search Book TOC Go Back
Alarm 4 (g) Time-out in an attempt to drive the Venting/Sampling needle’s axis
mechanism to/from its origin. IP - 13
Alarm 4 (h) Time-out in an attempt to drive the Mixing Z2-axis mechanism
to/from its origin. IP - 14
Alarm 4 (i) Time-out in an attempt to drive the X-axis mechanism to its
Slowdown Sensor. IP - 15
Alarm 4 (j) X Limit Sensor Time-out in an attempt to drive the X-axis
mechanism to/from its limit sensor. IP - 11
Alarm 4 (k) Z1 Limit Sensor Time-out in an attempt to drive the
Venting/Sampling needle’s axis mechanism to/from its origin. IP - 13
Alarm 4 (l) Time-out in an attempt to drive the Mixing Paddle’s axis
mechanism to its Position Sensor. IP - 16
Alarm 4 (m) Rack-B Sensor did not detect a Rack. IP - 17
Alarm 4 (n) At least 2 Rack Sensors A through D not in correct state during
phases of rack rotation. IP - 17
Alarm 4 (o) Rack Sensor A not in correct state during rotation phase. IP - 17
Alarm 4 (p) Rack Sensor B not in correct state during rotation phase. IP - 17
Alarm 4 (q) Rack Sensor C not in correct state during rotation phase. IP - 17
Alarm 4 (r) Rack Sensor D not in correct state during rotation phase. IP - 17
Table 1 - 1 Error Messages(continued)
MESSAGE
CORREC-
TIVE
ACTION