ScreenMaster RVG200
Paperless recorder
7 Configuration
OI/RVG200-EN
59
7 Configuration
7.1 Introduction
This section describes how to access the recorder's
Configuration
level and make changes to the
parameters using the operator keys.
7.2 Configuration level security
Two methods of configuration access protection are available:
1.
Password protection
(factory default).
The
Configuration
level cannot be accessed until the correct password has been entered – see
Figs. 7.1 and 7.2, pages 60 and 61 respectively.
2.
Internal switch protection
.
The
Configuration
level cannot be accessed until the internal switch set to the 'Configuration level
not protected' position – see Fig. 7.3, page 62.
The recorder can be configured for one of two levels of password protection:
Basic security:
Up to 4 users
Each user is assigned a unique 4-digit security code for
Configuration
level access
Optional security code protection of access to the logging facility
Advanced security:
Up to 40 users
Each user is assigned a unique password of up to 20 characters
Each user is assigned configuration and / or logging access privileges
Each user is assigned one of 3 levels of configuration level access privileges
Configurable password expiry times, password failure limits and minimum password length
Inactive user disabling
Configuration security parameter setting
Internal security switch
setting
(see Fig. 7.3)
Password protected
(Factory default)
Switch protected
(Alternative)
Configuration level protected
(Factory default)
Password access
No access
Configuration level not
protected
Free access
Free access
Table 7.1 Configuration security modes
