ScreenMaster RVG200
Paperless recorder
7 Configuration
76
OI/RVG200-EN
7.7.6 Users
Note.
User 1 is the System Administrator and is able to change user names / access privileges and enter
initial passwords for all other users.
if
Security system
is set to
Basic
(see Section 7.7.5, page 74) other users (if enabled by User 1) can
change their user name, password and access privileges.
if
Security system
is set to
Advanced
(see Section 7.7.5, page 74), other users cannot change their
user names and access privileges once set by User 1, but all users may change their own
passwords.
The following parameters are displayed only if
Security system
is set to
Basic
User
User 1
Enter a name and password for User 1.
Note.
User 1 only is able to access this parameter.
User 2 (to 4)
User 1 can enter names and associated passwords to enable up to 3
additional users access to the
Configuration
level.
Note.
If enabled by User 1, another user can access their associated
parameter and change the
Name
,
Password
and
Access
settings. However,
if
Access
is set to
Disabled
by that user and the configuration saved, only
User 1 can restore that user's access privileges.
Name
Enter a name for the selected user.
Password
Enter an initial password for the selected user.
Access
Set access privileges for the selected user.
Enabled
Disabled
–
–
The selected user is able to access the
Configuration
level.
The selected user is unable to access the
Configuration
level.
Note.
When the method of access to the
Configuration
level is set to
Password protected
(see Section 7.7.5, page 74) and a user with
Configuration
level access privileges changes the recorder's
configuration, the
Name
of the user is included in the audit log entry.
