ABB ScreenMaster RVG200 Operating Instructions Manual Download Page 71

Page: 71 / 190

ScreenMaster RVG200

Paperless recorder

7 Configuration

OI/RVG200-EN

Instrument tag

Enter the tag to be used to identify the recorder in configuration and audit
log files.

Refer to Appendix F, page 180 for further information regarding character
use in tags.

Note.

When reviewing data, the instrument tag is used to identify the

source of the data, therefore it is important to ensure that the instrument
tag is unique to each recorder.

Options enabled

Displays the optional functionality (Totalizers and / or Math and Logic
and / or Batch recording) enabled on the recorder.

If this parameter is changed, internally-recorded data files are recreated and unarchived data is lost.

Summary of Contents for ScreenMaster RVG200































































































































































































Search results

Summary of Contents for ScreenMaster RVG200

Reviews:

Related manuals for ScreenMaster RVG200

Brands by name

Popular brands

ABB ScreenMaster RVG200, Operating Instructions Manual

Search results

Summary of Contents for ScreenMaster RVG200

Reviews:

Related manuals for ScreenMaster RVG200

Brands by name

Popular brands