ABB ScreenMaster RVG200, Operating Instructions Manual

Page: 50 / 190

ScreenMaster RVG200
Paperless recorder 4 Operation
48 OI/RVG200-EN
4.8 Electronic signatures
Entering an electronic signature is the equivalent to signing the chart of a conventional paper recorder.
Local procedures may require the approval of a record by an authorized signatory; for this reason, an
electronic signature is password protected.
Fig. 4.12 Entering an electronic signature
Note. Up to 7 electronic signatures can be stored in the recorder's memory. If 7 signatures exist and a
new one is created, the oldest is overwritten.
Invalid
Password
Entered
Enter Password
(see Section 5.1.1, page 51)
If more than one
process group is
enabled (see
Section 7.7.1,
page 68), assign the
signature to one or
more groups
Create a new signature
or…
Select one of 7 previously
defined signatures
(see
Note
below)
Valid
Password
Entered
Create new signature or
edit an existing one.
Electronic signature is entered into alarm log.
If operator message annotation is enabled
(see page 82), the electronic signature is also
displayed on the chart.
Select Operator
Operator 1 – Enter Password
Operator 1
Operator 2
Change Password
Electronic Signature
<New Signature>
Signature Text 1
Signature Text 2
Signature Text 3
Signature Text 4
Signature Text 5
Signature Text 6
Signature Text 7
<New Signature>
Assign to Group :
1 Process Group 1
2. Process Group 2
3. Process Group 3
4. Process Group 4