ScreenMaster RVG200
Paperless recorder
7 Configuration
82
OI/RVG200-EN
7.8.2 Configuring the chart view
Chart
Chart view enable
Select the Chart view required:
Off
Vertical
Horizontal -->
Horizontal <--
–
–
–
–
Chart view disabled
Chart runs from top to bottom
Chart runs left to right with scale bar on left
Chart runs right to left with scale bar on right
Chart Annotation
Select the annotations to be displayed on the chart. Alarm events and
operator messages are displayed on the chart adjacent to the point at
which the alarm occurred – see Section 4.5.1, page 28.
This initial setting can be changed by the Operator if
Chart annotation
select
is enabled in the Chart view menu enables – see
Menu Enables
,
page 83.
Chart divisions
Enter the number of major and minor chart divisions to be displayed on
the chart and its scale bar.
Enter the number of major vertical divisions to be displayed.
Enter the number of minor vertical divisions to appear between the major
chart divisions.
Pointers/Indicators
Enable trace pointers to display a chart scale bar with colored pointers to
indicate the instantaneous trace positions.
Disable trace pointers to display the standard chart scale bar.
Enable indicators to display the numbered channel indicators at the top of
the screen.
Disable indicators to hide the indicators and enlarge the Chart view.
