ScreenMaster RVG200
Paperless recorder
7 Configuration
86
OI/RVG200-EN
7.9 Channel configuration
7.9.1 Recording channel setup
Fig. 7.10 Recording channel configuration
Setup
Source ID
*
Select the signal source for the selected channel. This can be any external
analog or digital signal – see Appendix A, page 146 for full list.
Note.
The tabs change according to the selection made.
Setting a channel source to
None
does not switch off the analog
input to which the channel was assigned previously (the analog
input continues to be monitored). To switch off an analog input, set
Type
for the required channel to
Off
Trace color / Zone
Select the color used to display the trace and its tag on Chart- and
Indicator-views – 24 colors are available.
Each recording channel can be configured to position its trace in one of 9
specific zones in the Chart views in order to separate traces that would
otherwise be very close to each other.
Select one of the pre-defined zones available if required.
*
If this parameter is changed from any previous setting other than
None
, a new internal data file for this
recording channel is created. All historical data stored internally for this channel is lost. If this parameter is
changed from a previous setting of
None
, new internal data files for all enabled recording channels are
created. Any unarchived data is lost.
