ABB ScreenMaster RVG200 Operating Instructions Manual Download Page 41

Page: 41 / 190

ScreenMaster RVG200

Paperless recorder

4 Operation

OI/RVG200-EN

Operator Message

Chart, indicator and
bargraph views only

Note.

Greyed-out if the relevant

Operator message

menu enable is not

selected – see pages 83 (Chart view), 84 (Indicator view) or 85 (Bargraph
view) as applicable.

Touch to add one of 24 predefined Operator Messages (see Section 7.7.7,
page 79) or one User-Defined Message to the Alarm Event log.

< user defined >

is selected, a data entry keyboard is displayed to enable

the message to be entered (see Fig. 7.6, page 65).

The selected or user-defined message is displayed briefly on screen. If

Operator Messages

annotation is selected (see

Chart Annotation

page 82) the message is also added to the chart.

Note.

When the recorder is in Historical Review mode, Operator Messages

generated are added at the current time, not the time indicated by the
cursor.

Summary of Contents for ScreenMaster RVG200































































































































































































Search results

Summary of Contents for ScreenMaster RVG200

Reviews:

Related manuals for ScreenMaster RVG200

Brands by name

Popular brands

ABB ScreenMaster RVG200, Operating Instructions Manual

Search results

Summary of Contents for ScreenMaster RVG200

Reviews:

Related manuals for ScreenMaster RVG200

Brands by name

Popular brands