ScreenMaster RVG200
Paperless recorder
Appendix E – Batch recording
OI/RVG200-EN
177
E.3 Configuration
E.3.1 Enabling batch security
To enable batch security, access Common Configuration (see Section 7.7.5, page 74) and select the
Security
tab.
E.3.2 Configuring batch access privileges
To enable operators to manually control batches, access Common Configuration (see Section 7.7.6,
page 76) and select the
User
' tab.
Note.
Batch security can be enabled only if the
Security system
parameter is set to
Advanced
– see
Section 7.7.5, page 74. If the
Security system
parameter is set to
Basic
, batch security is automatically
disabled and cannot be enabled.
Security
Security type
Set the Security type.
Security system
Set to
Advanced
to enable batch security.
User
User 1 Name
Configure User 1 (System Administrator)
User 1 Access
Ensure
Batch
is ticked to enable User 1 to start and stop batches – see
Repeat as required for other users.
Refer to page 178 to set the required type of batch recording security.
