manualshive.com logo in svg

ABB ESI-S, Installation, Operation And Maintanance Manual, Page: 24 / 223

Share
Download
ABB ESI-S Installation, Operation And Maintanance Manual Download Page 24

24  Hardware description

 Manual Energy Storage Inverter ESI-S

Armed

The inverter is ON or is in the startup procedure, or it

is stopped in fault condition but will restart as soon

as the fault has disappeared

T limit

The inverter temperature limit has been reached and

the inverter is derating itself to run at a safe

temperature

In standby

The inverter is in standby

(b)

Activ. Main

The main inverter settings are activated

Activ. Aux

The auxiliary inverter settings are activated

Unit miss.

One of the units in a multi-unit arrangement is not

available (e.g. due to a permanent error), or has not

yet been commissioned.

Pg. alarm 1

The programmable alarm 1 is activated

(c)

Pg. alarm 2

The programmable alarm 2 is activated

(c)

Pg. alarm 3

The programmable alarm 3 is activated

(c)

Warning 1

The programmable warning 1 is activated

(c)

Warning 2

The programmable warning 2 is activated

(c)

Warning 3

The programmable warning 3 is activated

(c)

Battery charging

The battery is currently charging

Connected to grid

The ESS is connected to grid i.e. not in islanding

Remarks:

(a)

: In order to set up this function, navigate to [/Welcome/Settings/Customer set./Digital

Outputs]

(b)

: More information on the standby function is given in

Section 7.9.4.1

(c)

: Different programmable warnings and alarms can be defined. More information on this

subject is given in

Section 7.9.2.4.1

Further it should be noted that:

−

Whenever a digital output is activated the corresponding icon on the
ESI-Manager display will change.

−

In a master-master inverter arrangement, only the master that has the control
over the complete system will activate its digital outputs.  For full redundant
functionality, it is recommended to monitor the digital outputs of all the units in
the system.

−

The default set-up for the digital contacts is given in

Table 10.

Table 10: Default set-up for the digital output contacts

Digital output number  Default function

1

Auxil. ON

2

ESI running

3

Full Load

4

Armed

5

Unit miss.

Summary of Contents for ESI-S
































































































































































































































Reviews:

No comments