Installing Pagis Pro
2–11
Contents
Index
The default selection is to use the Pagis scanner interface, which
provide access to all of Pagis Pro’s scanner settings.
It is recommended that you start with the default here,
particularly if your scanner is one that is listed in the release
notes as having been certified with Pagis Pro.
However, not all TWAIN scanner drivers are designed to be used
with the TWAIN user interface hidden. In this case, you must
configure your scanner to work with its own scanner settings.
If your scanner’s TWAIN driver is not designed to be hidden, you
may see any one of the following results when running this way
with Pagis Pro:
•
The message “An internal error has occurred” appears when
you attempt to scan.
•
One of the error messages, “Bad value” or “Invalid
parameter” appears during scanning.
•
Other error messages appear during scanning, or the scanned
image itself is poor.
•
Scan resolution, page size or brightness settings are not
available or functioning in the Scan Tool Properties menu.
If your scanner's TWAIN interface does not work with the
interface suppressed, do not use the setting “Use the Pagis
Settings – Scanner dialog box” in the Configure TWAIN driver
dialog box. Instead, select the setting to “Use scanner’s TWAIN
dialog box”.
See “Setting up your scanner or digital camera to work with
Pagis Pro” in Chapter 4 for complete information about changing
your scanner setup after Pagis Pro has already been installed.
After you select and configure your scanner, and click OK in the
Select Scanner dialog box, Pagis electronic registration
appears.