Wintriss AutoSet PAC 120 VAC, Руководство пользователя

Страница: 65 / 156

AutoSetPAC User Manual 1101600
Chapter 3 Initialization and Calibration 65
Making Tonnage/Waveform Initialization Settings
This section shows you how to make settings on the Tonnage/Waveform Initialization Menu (see
Figure 3-4), which you access by selecting TONNAGE/WAVEFORM on the Main Initialization
Menu.
Figure 3-4. Tonnage/Waveform Initialization Menu
The following settings are covered:
•
Initializing Parameters , page 65
•
Setting Input Names , page 66
• Disabling/Enabling AutoSetPAC Parameters
, page 68
• Setting Reverse Setpoint % of Press Capacity
, page 68
Instructions for setting press capacity are provided in
Setting Full-scale Tonnage on Your
AutoSetPAC , page 85. To make calibration settings, refer to Adjusting AutoSetPAC To Read the
Correct Tonnage
, page 87.
Initializing Parameters
Before making Initialization settings, you must initialize AutoSetPAC. This action clears all current
Initialization parameters and returns the unit to the default Initialization settings made at the factory.
To initialize AutoSetPAC, do the following:
1.
Select “INITIALIZE PARAMETERS,” the last item on the Tonnage/Waveform Initialization
Menu. The warning message shown in Figure 3-5 will display.