Wintriss AutoSet PAC 120 VAC, Руководство пользователя

Страница: 100 / 156

1101600 AutoSetPAC User Manual
100 Chapter 4 Using AutoSetPAC in Program Mode
Figure 4-6.
Load Tool Warning Message
2. Press ENTER to load the tool. (Press RESET if you want to cancel.) The message shown in
Figure 4-7 displays briefly; then you are returned to the Tool Program Menu.
Figure 4-7.
Tool Loading Message
NOTICE
You can also load the tool from the Tool Manager screen (see Figure 4-3) by pressing F4 (Load
Tool) with the desired tool selected.
Copying Tonnage Monitor Settings
Once you have established high, low, and repeatability setpoint percentages, you can use these
settings for all other dies you run on the press, using the Copy Tool function on the Tool Manager
screen. To copy one tool to another, do the following:
1.
On the Tool Manager screen (see Figure 4-3), select the tool you want to copy, and press the F8
(Copy Tool) function key. A message and Numeric Entry window display above the Tool
Manager screen, as shown in Figure 4-8.
Figure 4-8.
Tool Manager Screen with Copy Tool Message and
Numeric Entry Window Displayed