Wintriss AutoSet PAC 120 VAC Скачать руководство пользователя страница 5

Страница: 5 / 156

hank you for purchasing a Wintriss Product. We appreciate your business and want to do whatever

we can to ensure your satisfaction. Wintriss products are built to stay on the job day after day, and are

backed by an ironclad guarantee, international standards approvals, and unbeatable support.

Whenever you need assistance or service, we back all our products with excellent spare parts

inventories, training programs, and prompt repair service. We would like to share with you a list of

service options–probably the largest number of service options offered in the industry.

•

Technical Assistance

We offer a toll-free line for technical assistance. Call our Wintriss Technical Support Hotline at

1-800-586-TECH (8324) should you have any questions about your equipment. Our technical staff is

ready to assist you Monday through Friday, 8 a.m. to 5 p.m. EST. In many cases our experienced

technical staff can resolve your inquiry right over the phone.

•

Return Authorization

Please call our “800” number for a return authorization (RMA) number to return a product for repair.

Returned goods must arrive freight prepaid. In order to process your return quickly, we ask that you

provide us with the following pertinent information when you call: purchase order number, shipping

address, contact name and telephone number, and product type. The assigned RMA number should

appear on all packages returned to Wintriss Controls Group to ensure prompt service.
At the time of requesting an RMA, you will be quoted a flat-rate repair price for the product you are

returning. We ask that you either fax us a PO for that amount or enclose the PO with the returned

item. This will enable us to ship the item back to you as soon as the repair has been completed. If the

item cannot be repaired or there are additional charges, you will be contacted for approval.
Please be sure to carefully pack all returned items

and ship to our Acton, MA location.

•

Expedited Repair Program

Rush service providing 48 hour turnaround is available for most products upon request. An Expedite

Fee will be applied to our standard repair rate.

•

Board Exchange Program

If your needs are urgent, you can take advantage of our Board Exchange (EX) program. Call our

“800” number between 8 a.m. and 5 p.m. EST and we will send a replacement to you overnight. A fee

does apply to this service. Contact Wintriss Technical Support at 800-586-8324 for details.

•

Service Center

Our Service Center for product service is located at our headquarters in Acton MA. If your equipment

requires repair, please contact us at 800-586-8324 to obtain a return authorization number.

Nationwide field service is also available. Contact the Wintriss Technical Support group at 800-586-

8324.

•

Product Training

We also offer both product training and maintenance/troubleshooting courses at our Acton, MA and

Chicago-area facilities. On-site training is available from the factory or through your local Wintriss

representative.

•

Restocking Charge

Returned goods are subject to a 20% restocking charge if returned for credit. The minimum charge is

$50, not to exceed $250 per item.
Whatever the product, we are committed to satisfying you with innovative engineering, quality

construction, reliable performance, and ongoing, helpful support. Call us whenever you need

assistance.

Содержание AutoSet PAC 120 VAC





























































































































































Результаты поиска

Содержание AutoSet PAC 120 VAC

Отзывы:

Похожие инструкции для AutoSet PAC 120 VAC

Бренды по названию

Популярные бренды

Wintriss AutoSet PAC 120 VAC, Руководство пользователя

Результаты поиска

Содержание AutoSet PAC 120 VAC

Отзывы:

Похожие инструкции для AutoSet PAC 120 VAC

Бренды по названию

Популярные бренды