Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 168 / 190

B E L 2 9 0 F
U L L Y
A
U T O M A T I C
C
A S E
T
A P E
S
E A L E R
18
65-35-1 06/17/09
10) ‘SELECTED CPM’ Button and Display
The ‘SELECTED CPM’ display indicates the total number of cases
per minute that the operator wishes to seal. To change the selected
CPM, press the touch-sensitive area with the blue numerals. An
‘Alphanumeric Keypad’ window will appear. Enter in the new
selected CPM value, and then touch ENTER . This will enter the new
selected CPM value. The acceptable range for this value is 5-35. The
value in the non-touch-sensitive
‘INPUT’ field will change when a
value has been entered. Note that the ‘SELECTED CPM’ display
does not appear if the (optional) stop gate function is not included (or
not in use) on your machine.
11) ‘SETUP’ Button
To change any of the machine control settings or to put the machine
into
DRY CYCLE, the machine operation for the purpose of
troubleshooting, press the ‘SETUP’ button in the bottom right-hand
corner of the ‘Main Control’ screen. The ‘SETUP’ button disappears
from the ‘Main Control’ screen when the machine is running in
AUTOMATIC CYCLE mode.
12) ‘Setup’ Screen
The ‘Setup’ screen provides access to the many features related to machine diagnostics and tuning.
Depending on the machine options included (or enabled) with your machine, some toggle switches may
not appear on your touchscreen as they do in the manual.
‘Setup’ Screen
‘SELECTED CPM’ Button
‘SETUP’ Button