Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 48 / 190

WF30T Case Former Controls
5-35
23) ‘ALARM HISTORY’ Button
The
‘Alarm History’
screen displays the time and date
of each alarm condition that the machine has
experienced. The
‘Alarm History’
screen can be
accessed by pressing the
‘ALARM HISTORY’
button in
the upper left-hand corner of the
‘Setup’
screen. It is
useful in determining common problems, which can
assist the operator when troubleshooting or making
machine adjustments.
A slide bar on the right-hand side of the
‘Alarm
History’
screen enables the user to scroll up and down
the list of alarm messages.
To clear the alarm history, touch the clear button in the
bottom center of the screen. Touching this button
prompts the operator for a password. Touch the blank
field in the
‘Password’
window to bring up an
‘Alphanumeric Keypad’
window. Type the required
password. To enter the password into the
‘Password’
window, touch the
‘ENTER’
key. Then touch the
‘OK’
button in the
‘Password’
window. If you enter an
invalid password, an error message will display. Touch
OK
to remove the error message and input a valid
password
Touch the
‘SETUP’
in the bottom right-hand corner of
the screen or
‘MAIN CONTROL’
buttons to exit the
‘Alarm History’
screen.
24) ‘MACHINE FEEDBACK’ Button
The
‘MACHINE FEEDBACK’
button is located in the
upper part of the
‘Setup’
screen to the right of the
‘ALARM HISTORY’
button. Touch this button to bring
up the
‘Machine Feedback’
screen.
Figure 5-32: ‘Machine Feedback’ Screen
Figure 5-28: 'ALARM
HISTORY' Button
Figure 5-29: 'Alarm History' Screen
Figure 5-30: 'CLEAR'
Button
Figure 5-31: 'MACHINE
FEEDBACK' Button