Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 65 / 190

WF30T Case Former Operating Procedures
6-52
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 14: Machine Loading Checklist
Loading the Machine
S US
With Machine OFF:
Slide the magazine pusher arm back.
Position flat cases in the magazine in front of the magazine
pusher arm.
Adjust the pusher so that it pushes on the case, generally in-
line with the case separator, with the dowel hooked on the top.
Remove any banding straps that may be around the case
bundles.
Turn machine
ON
.
While the Machine is Running:
Position fresh cases in the magazine behind the magazine
pusher arm.
While applying modest pressure to the stacked cases to
maintain contact, switch the pusher air valve at the center of
the magazine
OFF
.
Lift the magazine pusher arm up to clear the stacked cases,
pull it back, and reposition it to push on the last case.
Switch the magazine pusher valve back to
ON
.
Remove any banding straps that may be around the case
bundles.
6.4 Clearing a Case Jam
The WEXXAR Model WF30T Case Formers will provide reliable, trouble-free performance on a
wide variety of case sizes. Occasional jams are not uncommon, but frequent jamming can
usually be traced to a particular reason, such as incorrectly set machine adjustment, and
corrected. Refer to Section 7:
‘Case Size Adjustments’,
Section 9.4:
‘Typical Maintenance
Adjustments’
and Section 10:
‘Troubleshooting & Repairs’
for further information.
To place the machine back into service as quickly as possible after a jam has occurred, proceed
as follows:
1. Press the
‘RESET’
button. This will return the machine’s mechanisms to their
HOME
positions so that it is easier to clear the case jam.
2.
Press the ‘EMERGENCY STOP’ button
. This will shut off the electrical and air power to
the machine mechanisms. It may take a few moments for the system air pressure to
decline to zero;
wait until air pressure has fully exhausted and all mechanisms are
stationary before proceeding.