Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 93 / 190

WF30T Case Former Machine Maintenance
- 9-80 -
9.2 Maintenance
9.2.1 Inspections
On a daily basis, the operators should inspect for:
1) Leaks at:
•
Pneumatic system (air supply).
•
Filter bottle drain.
2) Loose fasteners.
3) Irregular noise or signs of machine wear.
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 31: Machine Inspection
Maintenance and Cleaning
Inspection
S US
Inspect the pneumatic system for leaks.
Inspect the drain bottle for overflow.
Inspect for loose fasteners.
Inspect the belt condition, tracking and tension.
Inspect for irregular noise and signs of wear.
WARNING!
The tape knife blade is sharp, and can cause serious
injury.