Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 75 / 190

WF30T Case Former Case Size Adjustments
7-62
7.4 Case Width (Dimension ‘D’)
Figure 7-11: Dimension ‘D’
Use the two blue side handwheels, ‘D1’ and ‘D2’, to adjust the machine for the case width
dimension. The adjustments should approach their final position in a decreasing direction
(counterclockwise rotation) to eliminate the effects of backlash in the leadscrews.
Figure 7-12: Dimension ‘D’ Adjustments
1) Measure the width of the case against the master scale provided.
2) First, adjust the blue handwheel located at the base of the mast. See Figure 7-13. The
handwheel marked ‘D1’ positions the magazine guide, the mast assembly, and the major
flap folders. The scale is on the discharge pusher alongside the nearest major flap
folder.
3) Check the adjustment with an actual case, held open, with the bottom minor flaps folded.
The bottom major flaps should pass centrally between the bars of the major flap folders
without difficulty, with the case resting on the minor flap folders.
4) Make sure the case also slides smoothly from the major flap folders to the discharge
deck area, with the major flap folders in the
CLOSED
position.
Scale
for ‘D2’
‘D2’
Adjust
Scale
for ‘D1’
Pointer
for ‘D1’
‘D1’ Adjust