Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 33 / 190

WF20T Case Former Installation
4-20
4.2.4 Remote Demand Sensor
The
‘REMOTE DEMAND’
sensor optically detects if there is a jam at the discharge end, and halts
production of additional cases until the jam has been cleared. It can also be used to control ‘case
on demand’ production with more manual fill lines.
Table 4: Remote Demand Sensor
Sensor Name Status Part # Condition
LS-11 Steady
ON
02-707 Outfeed Conveyor Full
4.2.5 Magazine Management
This system uses optical sensors to monitor the cases remaining in the magazine, and detects
low and empty magazine conditions.
Table 5: Magazine Management Sensors
Sensor Name Status Part # Condition
LS-13
OFF
02-707 Empty Magazine
LS-14
OFF
02-707 Low Magazine
4.3 Interlock Switches
The interlock switches are used to ensure that all doors are
CLOSED
while the machine is
operating.
Table 6: Interlock Switches
Sensor Name Status Condition
DS-1
OPEN
Magazine Slide Door
OPEN
DS-2
OPEN
Bi-fold Door
OPEN
DS-3
OPEN
Outfeed Slide Door
OPEN
DS-4 (optional)
OPEN
Outfeed Guard Door
OPEN
DS-5 (optional)
OPEN
Outfeed Guard Door
OPEN
WARNING!
As the solenoid assembly de-energizes, either as part of
the machine control sequence or in the case of an
electrical failure, the possibility of unwanted actuator
movement must be considered, so use caution when
performing maintenance.