Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 154 / 190

B E L 2 9 0 F
U L L Y
A
U T O M A T I C
C
A S E
T
A P E
S
E A L E R
4
65-35-1 06/17/09
Installing the BEL 290
1. Remove the through bolts that secure the machine to the base.
2. If possible, use a forklift to move machine from its base with wooden blocks between the forks and
the frame.
3. While machine is elevated, install the footpad extensions or castor extensions to the bottom of each
leg and adjust for the appropriate outfeed height.
4. Position the machine where it is to be used.
L
EVELING THE
M
ACHINE
The machine should be level to avoid frame stress and ensure optimum performance. An adjustable
height footpad kit is included as standard equipment and can be used to level the machine on an uneven
floor.
The machine should be anchored to adjoining equipment or the floor to prevent any movement of the
machine by reactive forces that may occur as sealed cases are being driven through the machine outfeed.
BEL 290 fully automatic top and bottom taper
Case Width Crank
(position)
Case Height Crank
Control Panel