Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 76 / 190

WF30T Case Former Case Size Adjustments
7-63
Figure 7-13: ‘D1’ Adjustments
5) If the case has an unusual size, such as very narrow and short or very long proportions,
flap interference may occur during transfer. In such cases, it may be necessary to install
extension pieces on to the major flap folders, or limit their angular rotation.
6) Adjust the second handwheel marked ‘D2’, which is located at the discharge end. This
adjustment sets the width of the conveyor assembly in the tape application section of the
WF30T. The scale is located on the outfeed end of the machine frame.
Figure 7-14: ‘D2’ Adjustments
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 20: Dimension 'D' Adjustments
Size Adjustments
Case Width (Dimension ‘D’)
S US
Measure Dimension ‘D’ against the scale.
Adjust first the handwheel located at the base of the mast that sets the
major flap folders’ position.
Check the adjustment with an actual case.
Adjust the second handwheel marked ‘D’ located at the far right that sets
the width of the outfeed conveyor assemblies.
Check the adjustment with an actual case.