Wexxar WF30T, Руководство по эксплуатации и обслуживанию

Страница: 87 / 190

WF30T Case Former Other Machine Adjustments
8-74
8.3 Magazine Pusher
The magazine pusher holds the stacked cases
vertically and provides a moderate force to
help move the cases towards the separator
end of the magazine.
1) Place some flat case blanks in the
magazine.
2) Adjust the pusher so that it pushes on
the case, generally in-line with the
case separator, with the dowel hooked
on the top, as shown in Figure 8-3
.
3) Set the pressure regulator on the
magazine pusher to the recommended
level of between 20 and 35 PSI.
Figure 8-3: Magazine Pusher
Check the ‘S’ box for Satisfactory Performance and ‘US’ box for Unsatisfactory Performance.
Table 26: Magazine Pusher Adjustment
Size Adjustments
Magazine Pusher Adjustment
S US
Place some flat cases in the magazine.
Adjust the pusher arm so that it pushes on the case, generally in-line
with the case separator, with the dowel hooked on the top.
Set the pressure regulator on the magazine pusher to between 20
and 35 PSI.
Dowel
Pusher
Arm