werma WERMA-StockSAVER, Руководство пользователя

Страница: 303 / 474

Error Possible cause Solution
Display message
E r r o r :
S m a r t B o xn o ti n i t i a l i s e d
SmartBox is not initialised. Configure SmartBox via
USB.
Display message
E r r o r :S e n -
s o r b o xf u l l
Location is full.
Display message
E r r o r :
U n k n o w nr e a s o n
Unknown error Repeat the process.
Display message
P l a c e m e n t
e r r o r
Replenishment to incorrect
location, or material has been
placed in stock without being
scanned first. 1. Remove material from loca-
tion.
2. Press .
3. Rescan the bin again and
place into stock correctly.
7.3 SensorBox
Error Possible cause Solution
Blue LED does not come on.
Display in software
Bus cabling: Plug con-
figuration incorrect Check plug configuration
and re-cable if necessary.
SensorBox defective Check functioning and
replace if necessary.
7.4 Sensors
Error Possible cause Solution
Sensors do not respond.
LED on the sensor does not
come on.
Sensor cabling: Plug con-
figuration incorrect or broken
cable Check plug configuration
and re-cable if necessary.
Blue LED does not come on
Display in software
SensorBox defective Check functioning and
replace if necessary.
Sensor does not detect bins. Angle of inclination incorrect
Sensor reacts to reflections
from shelving rails.
Check angle of inclination
of sensor and change if
necessary.
Sensor detects a bin although
there is no bin in the location. Angle of inclination incorrect
Sensor reacts to reflections
from shelving rails.
Check angle of inclination
of sensor and change if
necessary.
Sensor detects status change
although no status change
has occurred. Angle of inclination incorrect
Sensor reacts to reflections
from shelving rails.
Check angle of inclination
of sensor and change if
necessary.
Version: 1.0 - 03/2018 145