INSTRUCTIONS
HAZL34™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
Fig: 1
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required
for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fi xture. No user serviceable parts inside.
CAUTION: TO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINARE FROM SUPPLY CIRCUIT
BEFORE OPENING. KEEP TIGHTLY CLOSED WHEN IN OPERATION.
CLASS I DIV. 2 GROUP A, B, C, D.
MIN. 90°C SUPPLY CONDUCTORS.
REFER TO TOOL LIST ON PAGE #4
PENDANT MOUNT
The fi xture is suitable for wet locations.
1. Open the
Driver Box Cover
by removing
Silicone Covers
and
loosening
Captive Screw
s as shown in Fig. 1.
Tether Cable
will prevent
the
Driver Box Cover
from falling out.
2. Remove the threaded
Knockout Plug
(Fig. 1)
. Attach the
Pendant
(by others)
to the
Fixture
(Fig. 2)
. Use appropriate thread sealer. Tighten
the
Set Screw
to secure the
Pendant
(Fig. 3
).
3.
Pass the supply wires in the
Pendant
through the
Knockout
,
connect to the
Terminal Block
(Fig. 2)
using proper polarity.
Note: Torque value 4.4 inch-lbs
.
4.
Replace the
Driver Box Cover
with
Captive Screws
(Fig.4)
and
tighten to a minium of
2.5 N. M.
and replace
Silicone Covers
.
WARNING: To prevent wiring damage or abrasion, do not expose
wiring to edges of sharp objects.
HAZL34-40
HAZL34-80
Drive Box Cover
Captive
Screws
Tether Cable
Figure
15
Fig: 2
Fig: 3
Fig: 4
Knockout Plug
Set Screw
Terminal Block
Pendant
HAZL34-120
Silicone Covers
Silicone Covers
Pendant
