INSTRUCTIONS
HAZL34™ INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
CHAIN MOUNT INSTALLATION
Figure 13
CEILING MOUNT KIT
1. Mark the ceiling or wall as appropriate, see Fig. 11.
2.
Use suitable hardware
(by others)
for the mounting surface.
3.
Mount the fi xture to the
CM Brackets
using the P
ivot
and Locking Screws
(Fig. 12)
.
4.
Install fi ttings and conduit. Use suitable thread sealer for fi ttings. Pass the supply wires in the conduit
through
Conduit Entry
(Fig. 6).
C
onnect to the
Terminal Block
(Fig. 2)
using proper polarity.
Note: Torque value 4.4 inch-lbs.
5. Wire in accordance with local connection standards and make sure to take good waterproof measures at the joint of conduit.
6.
Loosen the
Pivot Screw
and
Locking Screw
(Fig. 12)
. Adjust fi xture to desired angle
(Fig. 8)
. Tighten
Pivot Screw
and
Locking Screw
.
HAZL34-CM Kit ordered separately.
Fig: 9
Spring Hooks
(provided)
2-36” Chains are included.
Fasteners
(by others)
Pivot Screw
Locking Screw
440mm
(17- 5/16”)
154mm
(6 -1/16”)
1. Remove the Yoke.
2. Install
Rings
or
Eye-bolts
(by others)
to hang the
Chain
with
Spring Hooks
(provided)
as shown in Fig. 9.
3.
Install the fi xture onto the
Chain
(Fig. 10).
4.
Install appropriate conduit. Use suitable thread sealer for fi ttings. Pass the supply wires in the conduit through
Conduit Entry
(Fig. 6)
.
5. Connect to the
Terminal Block
(Fig. 2)
using proper polarity.
Note: Torque value 4.4 inch-lbs.
5. Wire in accordance with local connection standards and make sure to take good waterproof measures at the joint of conduit.
Rings or
Eye-Bolts
(by others)
Chains
Fig: 10
Fig: 11
CM Brackets
Fig: 12
