Vision MaxPro, Руководство по эксплуатации

Страница: 69 / 203

Operations 65
© 2006 Vision Engraving Systems
IMPORTANT:
Each time the machine is turned on, you must press the Goto Home button
first before any engraving or table movement can take place.
After the initial use, the Goto Home button will move the spindle to the current home
position.
If you need to cancel a job from engraving while it is running, press the Goto Home button to
move the spindle back to the home position and cancel out the current job.
SET SURFACE
Button - This button is used to set the surface of your material. The Set
surface Button is only used when the proximity sensor is off. You can use the XY job
Buttons to move the cutter out over the material. Press the Set Surface button and then use
the Up and Down jog buttons to move the cutter to the surface of the material and then
press Enter. The spindle will lift to the default Z lift height and the surface will be set.
ROTARY AXIS Button - This button allows for a round items to be engraved. When the
rotary axis button is pressed, t he LCD will display the screen below.
Press
1
for standard round items or
2
for rings and then press
ENTER
. The following
screen will appear.
Enter the diameter of the item you would like to engrave. Use a ruler to measure the
distance across the round item per the picture below.