4 Parameters
66VFD700 AC Drive Getting Started Guide
Output
voltage
Output
frequency
Vmax
f
b
0
3
2
1
Figure 4-2Motor V/F curve
Parameter ID
Parameter Name
Range
【
Default
】
Change Mode
P00.24 (P10.08)
Load default
0
～
1
【
0
】
Stop Only
0: No action
1: Load default
When P00.24=1, press PRG key, and default setup will be loaded and saved into the EEPROM,
P00.24=0.
NOTE:
After loading default, except motor parameters, all other parameters are recovered to
factory setup;
After loading default, P00.01 is 0, which means User Code is disable;
Uploading the parameter setup to the keypad’s EEPROM before loading default is
recommended.
