Vanderbilt SPC4 Series Скачать руководство пользователя страница 93 | Manualshive

Страница: 93 / 402

Vanderbilt SPC4 Series Скачать руководство пользователя страница 93

12 Keypad user interface

The following keypad models are available:

l

SPCK420/421 — referred to throughout this document as the LCD Keypad

l

SPCK620/623 — referred to throughout this document as the Comfort Keypad

12.1 SPCK420/421

This section covers:

12.1.1 About the LCD keypad

12.1.2 Using the LCD keypad interface

12.1.3 Data entry on the LCD keypad

12.1.1 About the LCD keypad

The LCD keypad is a wall-mounted interface that allows:

l

Engineers

to program the system through the Engineer Programming menus (password protected)

and to set/unset the system; a user can control the system on a day-to-day basis.

l

Users

to enter User Programming menus (password protected), and to perform operational

procedures (set/unset) on the system. (See the

SPCK420/421 User Manual

for more details of user

programming.)

The LCD keypad unit includes an integral front tamper switch and has a 2 line x 16 character display. It
features an easy-to-use navigation key to assist in locating required programming options, and has 2
context sensitive soft keys (left and right) for selecting the required menu or program setting. 3 LEDs on
the keypad provide an indication of AC power, system alerts, and communications status.

The LCD keypad may be factory fitted with a Portable ACE (PACE) proximity device reader (see

Overview of keypad types

© Vanderbilt 2018

93

A6V10276959-d

11.2018

«
...
91
92
93
94
95
...
»

Содержание SPC4 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов