Vanderbilt SPC4 Series Скачать руководство пользователя страница 128 | Manualshive

Страница: 128 / 402

Vanderbilt SPC4 Series Скачать руководство пользователя страница 128

Setting

Description

Direct Set

Enable if Fullset/Partset function keys should be indicated in the LCD display.

Audible indications

Alarms

Select speaker volume for alarm indications or disable sound.

Entry/Exit

Range is 0–7 (max volume).

Chime

Select speaker volume for entry and exit indications or disable sound.

Keypress

Range is 0–7 (max volume).

Voice
Annunciation

Select speaker volume for chime or disable sound.

Partset
Buzzer

Range is 0–7 (max volume).

Deactivation

Calendar

Select if the keypad should be limited by calendar.

Mapping
gate

Select if keypad should be limited by a mapping gate.

Keyswitch

Select if keypad should be limited by a keyswitch.

PACE Entry

Tick this box to disable the keys on the keypad during the entry time when a PACE is configured on
the keypad.

Areas

Location

Select the secured area where the keypad is located.

Areas

Select which areas can be controlled through keypad.

Options

Delay Fullset Select to configure a delayed set across all keypads. The location of the keypad is ignored and all

areas will perform a full exit time count down.

NOTICE: An area should be assigned to a keypad only if the keypad is inside the assigned area,
and if an entry/exit route is defined. If an area is assigned, when the particular area is set or unset
then entry and exit timers are used (if configured). Other features related to entry/exit routes also
become available. If no area is assigned, the area is set or unset immediately and other entry/exit
features are not available.

16.6.4.4 Edit Expanders

To edit expanders:

1. Scroll to EXPANDERS > EDIT.

2. Press SELECT.

3. Scroll to the device to be edited and press SELECT.

Parameters and details, if applicable, are displayed for editing.

4. Press BACK to exit the menu.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the keypad

© Vanderbilt 2018

128

A6V10276959-d

11.2018

«
...
126
127
128
129
130
...
»

Содержание SPC4 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов