Vanderbilt SPC4 Series Скачать руководство пользователя страница 181

Страница: 181 / 402

A list of detected expanders and any associated PSUs is displayed.

Expander ID

This ID number is a unique identifier for the expander.

Description

Text description of the expander. This text will also appear on the browser and keypad.

Type

The type of expander detected (I/O, PSU, keypad, etc.).

S/N

The serial number of the expander.

Version

The firmware version of the expander.

Comms

The status of the expander (online or offline).

Status

The status of the expander (OK, Fault, OP Tamper).

PSU

The type of PSU that is fitted to the expander, if applicable. Click the PSU to view the PSU status.

Performable actions

Refresh

Click the button to update the status of the X-BUS.

To view more status information:

Click any of the expander’s identifying parameters (ID, description, type, serial number) to display
further status details.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the browser

181

A6V10276959-d

11.2018

Содержание SPC4 Series



















































































































































































































































































































































































































Результаты поиска

Содержание SPC4 Series

Отзывы:

Vanderbilt SPC4 Series, Руководство по установке и настройке, Страница: 181 / 402

Результаты поиска

Содержание SPC4 Series

Отзывы: