Vanderbilt SPC4 Series Скачать руководство пользователя страница 136

Страница: 136 / 402

ACCESS
CONTROL

If no card assigned to the user:

ADD CARD

LEARN CARD

If a card assigned to the user:

EDIT CARD
– CARD NUMBER
– CARD ATTRIBUTES

RESET CARD

DELETE CARD

LANGUAGE

Select a language for this user that will be displayed on the system.

16.7.2.1 Access Control

One access card can be assigned to each of the users on the control panel.

To configure the access control for a user:

1. Scroll to

USERS>EDIT

2. Press

3. Select the user which should be configured and press

4. Scroll to

ACCESS CONTROL

and press

The following sections provide programming steps found within the access control option of the
selected user.

Add Card manually

If the card format of the card number is known, the card can be created manually.

The site code of the card is configured for the user profile that is assigned for this user.

1. Scroll to

ADD CARD

2. Press

An empty card has been added and can now be edited.

Learn Card

NOTICE: Only cards with supported card formats can be learned.

If the card number or the card format is not known, the card can be read and its information learned.

1. Scroll to

LEARN CARD.

2. Press

3. Select the door that the card will be presented.

4. Press

NOTICE: The new card can be presented at the entry or the exit reader of the
selected door.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the keypad

136

A6V10276959-d

11.2018

Содержание SPC4 Series



















































































































































































































































































































































































































Результаты поиска

Содержание SPC4 Series

Отзывы:

Vanderbilt SPC4 Series, Руководство по установке и настройке, Страница: 136 / 402

Результаты поиска

Содержание SPC4 Series

Отзывы: