Vanderbilt SPC4 Series, Руководство по установке и настройке, Страница: 285 / 402

17.10.5.1 Adding/Editing a calendar
1. Select Configuration > Calendars > Add .
The following page will be displayed:
2. Provide a Description for the calendar (max. 16 characters).
Copying a Calendar
To make a copy of this calendar structure, click the Replicate button.
A new calendar is created with the same configuration as the original calendar. You can provide a new
description for the new calendar and edit the calendar configuration as required.
Week Types
Calendars are configured by assigning an optional Week Type for each calendar week. Up to three Week
Types may be defined for each calendar. Not all weeks must have a Week Type (that is, a Week Type
may be ‘None’). There is a system maximum number of 64 calendar configurations.
To configure a week type
1. Click Week Types .
2. Enter the desired times for setting/unsetting or for triggers. Use time guidelines for Automatic
Setting/Unsetting of Areas (see Automatic setting/unsetting of areas on the facing page), or for
Automatic Setting/Unsetting of other Panel Operations (see Automatic setting/unsetting of other
panel operations on page 287).
Up to three week types may be configured.
3. Click Save and then Back .
4. Select the desired week type from the drop down menu for each of the required scheduled weeks in
the calendar.
5. Click Save .
6. Click Back .
See also
Automatic setting/unsetting of areas on the facing page
Automatic setting/unsetting of other panel operations on page 287
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 285 A6V10276959-d
11.2018