91
System settings
Power-on Playback settings
This setting enables automatic playback of pre-designated
phrases (maximum of 3 phrases) when the UDMR is turned
on.
The Power-on Playback function can therefore be used to
automate show control whereby, for example, moving lights
turn on in phrase 1; the performance commences in phrase 2;
and moving lights turn off in phrase 3.
1. Press the MODE button.
The MODE indicator will light up.
2. Turn the SELECT dial to '10.2. POWER-ON
PLAYBACK' then press the SELECT dial.
3. Use the SELECT dial to set the POWER-ON
PLAYBACK to 'ON' then press the SELECT dial.
4. Turn the SELECT dial to select the memory card
containing the phrase for automatic playback.
* Selecting '---' completes the registration.
5. Turn the SELECT dial to designate the number
of the phrase for automatic playback then press
the SELECT dial.
* Only available phrase numbers are displayed.
6. Repeat steps 4 - 5 above to register each phrase.
7. Once you have finished registering all of the
phrases, select [---] then press the SELECT dial.
8. The confirmation screen is displayed. Press the
ENTER button to execute the operation.
To cancel the operation, turn the SELECT dial to
'CANCEL' then press the ENTER button.
Once the setting is complete, the display returns to the
settings selection screen.
9. Press the MODE button.
The setting is completed and the display returns to the
default screen.
Pressing the MODE button mid-setting displays a confirmation
screen asking you whether or not to cancel the setting. Please
note that selecting 'YES' and pressing the ENTER button
returns you to the default screen and cancels all settings made
up to that point.
CAUTION
