Pattern phrase playback using BPM detection
78
UDMR settings
1. Press the MODE button.
The MODE indicator light comes on.
2. Turn the SELECT dial to '8.1 TAP TEMPO' then
press the SELECT dial.
3. Using the SELECT dial, set the audio input to
'ON' then press the SELECT dial.
4. The confirmation screen is displayed. Press the
ENTER button to execute the operation.
To cancel the operation, turn the SELECT dial to
'CANCEL' then press the ENTER button.
Once the setting is complete, the display returns to the
settings selection screen.
5. Press the MODE button.
The setting is completed and the display returns to the
default screen.
Pressing the MODE button mid-setting displays a confirmation
screen asking you whether or not to cancel the setting. Please
note that selecting 'YES' and pressing the ENTER button
returns you to the default screen and cancels all settings made
up to that point.
Playback method
1. Start the playback of a pattern phrase which has
the switchover timing set to 'BPM'.
The BPM indicator light comes on and the BPM is shown
on the Phrase no./BPM display.
2. Turn on the switch connected to the 7 TAP
terminal three times or more in time with the
tempo.
The BPM detection begins.
Once the BPM has been successfully detected, the BPM
display flashes once and the detected BPM appears.
Phrase switchover is then performed based on the
detected BPM.
If the BPM detection is unsuccessful, the playback continues
at the BPM configured for pattern phrases.
If the start of the bar deviates during playback, turn on the
switch connected to the 7 TAP terminal once. The timing upon
which the switch is turned on can be used to update the start
of the bar.
CAUTION
CAUTION
