Controlling the UDMR from external devices (control input terminals)
57
Playback submode 4: (Level: on; edge: on)
Binary-designated phrases are played back repeatedly.
Playback is repeated as long as the START signal input
continues.
Phrase playback can be initiated using the binary designation
during continuous START signal input.
When the control signal to the 10 START terminal is turned off,
playback is terminated once the current phrase ends.
If a START signal is newly input during phrase playback, the
current phrase playback is suspended and the designated
phrase playback is commenced.
UDMR settings
Selecting control input mode
This section describes how to configure the control input mode
(direct playback/binary playback) to binary playback.
Controlled input playback cannot be performed simply by
connecting a device to the UDMR's control terminals. Instead,
it is necessary to configure the control input mode to match
the terminal connection method.
1. Press the MODE button.
The MODE indicator light comes on.
2. Using the SELECT dial, choose '5.1 CONTROL
INPUT' then press the SELECT dial.
3. Turn the SELECT dial to 'BINARY PLAYBACK'
then press the SELECT dial.
4. The confirmation screen is displayed. To
execute the operation, select 'SET' then press
the ENTER button.
To cancel the operation, turn the SELECT dial to
'CANCEL' then press the ENTER button.
Once the setting is complete, the display returns to the
settings selection screen.
5. Press the MODE button.
The setting is completed and the display returns to the
default screen.
Pressing the MODE button mid-setting displays a confirmation
screen asking you whether or not to cancel the setting. Please
note that selecting 'YES' and pressing the ENTER button
returns you to the default screen and cancels all settings made
up to that point.
Binary-designated
terminals 1-9
START terminal
Phrase output
A003 suspended
CAUTION
CAUTION
