Modifying recorded phrases (phrase settings)
41
7. If you have selected 'BPM' for the phrase
switchover timing, you must also designate the
phrase switchover tempo.
1. Turn the SELECT dial to the switchover tempo (BPM)
then press the SELECT dial.
2. Designate the switchover 'bars'. For example, a
setting of [BPM = 120 x 8] should be designated in
order to effect a phrase switchover every eight bars at
a temp of 120.
* The number of beats in a single bar is four. This
value cannot be altered.
3. Press the SELECT dial once you have designated the
tempo.
8. Turn the SELECT dial to designate the phrase
switchover method.
Once you have designated the phrase switchover tempo,
press the SELECT dial.
Switchover
method
Operation
Cut
Switches immediately to the next phrase.
On
Switches slowly to the next phrase.
9. When turning the fade to ON with the switchover
method, you must also designate the fade time
(time until total switchover).
Turn the SELECT dial to designate the fade time.
Once you have designated the fade time, press the
SELECT dial.
10. Next, you must register the phrase.
Turn the SELECT dial to designate the desired
registration number (No. 001- 100) then press the
SELECT dial.
11. Select the memory card containing the recorded
phrase.
Turn the SELECT dial to designate memory card A or B
then press the SELECT dial.
* Selecting '---' means that the phrase will not be
registered.
12. Select the phrase number of the phrase to be
registered.
Turn the SELECT dial to select the phrase number then
press the SELECT dial.
* Only available phrase numbers are displayed.
13. Designate the time interval the start of the next
phrase playback.
Turn the SELECT dial to the desired time interval (00.0 -
59.9s) then press the SELECT dial.
14. Repeat steps 10 - 13 above to register each
phrase.
15. Once you have finished registering all of the
phrases, select 'END' in the registration number
(No. 001 - 100) setting then press the SELECT
dial.
