Controlling the UDMR with MIDI signals
74
Configuring the Sync Out
(using UDMR as master)
This section describes how to configure the transmission of
MIDI sync signals (MTC) from the MIDI OUT terminal.
1. Press the MODE button.
The MODE indicator light comes on.
2. Turn the SELECT dial to '7.2 SYNC OUT' then
press the SELECT dial.
3. Use the SELECT dial to choose the 'MTC' setting
then press the SELECT dial.
4. The confirmation screen is displayed. Press the
ENTER button to execute the operation.
To cancel the operation, turn the SELECT dial to
'CANCEL' then press the ENTER button.
Once the setting is complete, the display returns to the
settings selection screen.
5. Press the MODE button.
The setting is completed and the display returns to the
default screen.
Pressing the MODE button mid-setting displays a
confirmation screen asking you whether or not to cancel
the setting. Please note that selecting 'YES' and pressing
the ENTER button returns you to the default screen and
cancels all settings made up to that point.
Selecting the TC error level
(using UDMR as slave)
This section describes how to configure the interval (0 - 10) for
checking for received MTC/LTC signals. When synchronizing
the UDMR as a slave, the unit constantly checks whether
MTC/LTC signals are being sent correctly and continuously. If
MTC/LTC signals are not sent continuously, the UDMR
determines that a problem has occurred with the master
device and terminates the sync operation.
The TC error level the criterion for this determination. The
larger the TC error level value, the greater the tolerance for
error. Selecting a high value therefore enables slave playback
even when there are some problems with the receipt of
MTC/LTC signals.
1. Press the MODE button.
The MODE indicator light comes on.
2. Turn the SELECT dial to '7.4 TC ERROR LEVEL'
then press the SELECT dial.
3. Using the SELECT dial, set the desired TC error
level (0 -10) then press the SELECT dial.
4. The confirmation screen is displayed. Press the
ENTER button to execute the operation.
To cancel the operation, turn the SELECT dial to
'CANCEL' then press the ENTER button.
Once the setting is complete, the display returns to the
settings selection screen.
5. Press the MODE button.
The setting is completed and the display returns to the
default screen.
Pressing the MODE button mid-setting displays a
confirmation screen asking you whether or not to cancel
the setting. Please note that selecting 'YES' and pressing
the ENTER button returns you to the default screen and
cancels all settings made up to that point.
CAUTION
CAUTION
