manualshive.com logo in svg

Universal Laser Systems PLS3.60, Руководство по безопасности, установке, эксплуатации и базовому обслуживанию


Поделиться
Скачать
background image

GRAPHICS SOFTWARE SETUP 

Section 3-8 

 

CorelDRAW 12 

 
Windows XP 
 

Note:  CorelDRAW 12 was optimized for Windows XP and is not compatible with Windows Vista.  
We also suggest not running it under Windows 95/98.  Therefore, we have only included setup 
instructions for Windows XP. 

 

1.  Make sure that you have installed all Service Releases and software patches from Microsoft.  For 

Windows XP, install Service Pack 2.  If you are reading this document from the Software Installation 
CD-ROM, as a service to you, you can find the file on this CD.  For the latest releases, check 
Microsoft’s website, www.microsoft.com. Please contact Microsoft if you have any questions 
regarding these upgrades. ULS is not responsible for any problems as a result from the usage of 
these patches. 

 
2.  If you have not already done so, install CorelDraw on your computer, but do not open it yet. 
 
3.  It is important that your version of CorelDraw is updated with the latest patches and service releases. 

For the latest patches and updates go to CorelDraw’s website, www.corel.com.  Be sure to check for 
any updates from time to time to keep your version up to speed.  Please contact CorelDraw if you 
have any questions regarding these upgrades. ULS is not responsible for any problems as a result 
from the usage of these patches. 

 
4.  The ULS Windows Printer Driver must be loaded before continuing.  Please refer to Section 2-8 on 

the manual on how to install the driver.  If you have already installed the printer driver, you will need 
to re-insert the Software Installation CD-ROM back into your CD drive at this time. 

 
5.  Using Windows Explorer, locate the file named “ULS.CPL” and “ULS.PAL” on the Software 

Installation CD-ROM, and copy this file over to the

 

C:\Program Files\Corel\Corel Graphics 

12\Languages\EN\Custom Data\Palettes folder.  

Note:  ULS.CPL may not show up with a .CPL file 

extension.  It may be listed as ULS with “Control panel extension” shown as a detail.

 

 
6.  While still in Explorer, locate a file named “corelapp.ini” located in 

the C:\Program Files\Corel\Graphics12\Config folder.  Double-click 
on the file it will open up in Notepad.  Scroll down past the semi-
colons to the [Config] header. Then scroll down about 31 lines to 
the line that reads “Fontrasterizer=1”.  Change the 1 to a 0 (this is 
a zero, not an o), save the file, and exit Notepad. 

 
7.  Open CorelDRAW 12 and start a new graphic. 
 
8.  In the menu bar, click on “Window”, then “Color Palettes”, and then click “None”. Once again click 

“Window”, then “Color Palettes”, and then “Open Palette”.  In the pop-up box, double-click on 
"ULS.CPL" which allows it to appear on the right side of the screen. 

 
 
9.  On the property bar, click on the landscape 

orientation (the sideways rectangle) (1).  Now type 
in the page width and height that matches your 
laser platform (3).  If you wish you can change the 
units from inches to millimeters (2). 

 
 
 
 
 
 
 
 

Содержание PLS3.60





















































































































Отзывы:

Нет отзывов

Похожие инструкции для PLS3.60

Parkside 359506 2101 Translation Of The Original Instructions preview
359506 2101
Бренд: Parkside Страницы: 100
Parkside PGG 15 A1 Manual preview
PGG 15 A1
Бренд: Parkside Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды