manualshive.com logo in svg

Universal Laser Systems PLS3.60, Руководство по безопасности, установке, эксплуатации и базовому обслуживанию


Поделиться
Скачать
background image

SAFETY 

Section 1-11 

 

FCC Compliance 

 
This ULS laser system has been tested and found to comply with Federal Communication Commission 
(FCC) directives regarding Electromagnetic Compatibility (EMC). In accordance with these directives ULS 
is required to provide the following information to its customers. 
 

FCC Compliance Statement and Warnings 

 
This device complied with FCC Rules Part 15. Operation is subject to the following two conditions: 
 

1.  This device may not cause harmful interference, and 
 
2.  This device must accept any interference received, including interference that may cause 

undesired operation. 

 
This equipment has been tested and found to comply with the limits for a Class A digital device as set 
forth in Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with 
manufacturer’s instructions, may cause harmful interference to radio communications.  Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his or her own expense. 
 
Users should be aware that changes or modifications to this equipment not expressly approved by the 
manufacturer could void the user’s authority to operate the equipment. 
 
This equipment has been type tested and found to comply with the limits for a Computing Device per FCC 
part 15, using shielded cables. Shielded cables must be used in order to insure compliance with FCC 
regulations. 
 
 
 

Recycling 

 

 

By placing the above symbol on our products and accessories Universal Laser Systems is indicating that 
we are committed to helping reduce the amount of waste electronics ending up in municipal landfills. 
Therefore Universal Laser Systems urges consumers to recycle this product and its accessories. 
Universal Laser Systems is equipped to recycle any of its electronic products and accessories and will 
assist our customers with their recycling options. To arrange for recycling of your ULS product or 
accessory, please contact Universal Laser Systems for more information.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание PLS3.60





















































































































Отзывы:

Нет отзывов

Похожие инструкции для PLS3.60

Бренды по названию

Популярные бренды

Загрузить еще бренды