Universal Laser Systems PLS3.60, Руководство по безопасности, установке, эксплуатации и базовому обслуживанию

Страница: 65 / 116

BASIC SYSTEM FEATURES
Section 6-7
R
CONDITION REASON
ed LED
The system has initialized.
The top, front, and laser cover doors are closed and the system is ready to receive a
file. ON
le. The system is running a fi
The system is turned off.
OFF
The system is initializing.
FLASHING The top, front, or laser cover door is open.
START
: Begins laser processing of the current file displayed on the keypad screen. If any of
the doors are opened when you press this button, the motion system will start to move as if it
is processing the file, however, the CO2 laser beam is disabled and the red diode pointer will
be enabled to simulate the laser process.
ove to the home position before opening any door otherwise the laser beam will not resume
from the po d at.
This button enters the menu item the cursor is currently on.
back to the previous menu or it cancels any changes that
you have made to that menu item.
age will start to move slowly and will accelerate to a faster speed until you release
the button(s).
nu of the display. When in the
Z-Axis menu these buttons move the table up and down.
nd RIGHT buttons moves the cursor
between the tenths and hundreds decimal place.
. Auto
cusing is complete once the table stops moving. To exit Auto-Focus press the ESCAPE button.
PAUSE:
If a file is running, the PAUSE button halts the engraving or cutting process and
the focus carriage will move to its home position in the upper right corner of the engraving
area. If the PAUSE button is pressed again after the initial pause it will resume cutting or
engraving again at the location where the motion system was paused. Please wait for the motion system
to stop and m
sition it stoppe
SELECT:
ESCAPE:
This button exits you
MOTION CONTROL:
Pressing and holding down one or two adjacent, arrow buttons will
cause the Focus Carriage to move in the respective direction while in the XY menu. The
focus carri
UP and DOWN:
Moves the cursor up or down on the display. These buttons also
move the X-Axis arm back and forth when on the XY me
LEFT and RIGHT:
While in the XY menu, the LEFT and RIGHT buttons move the
focus carriage left and right. While on the FILE menu the buttons scroll through the files
in memory, changes Colors, increases or decreases Power, Speed and PPI settings on
the fly. While on the Z-Axis menu the LEFT a
AUTO-FOCUS:
This button has two purposes: Manual Focus and Auto-Focus. While on
the main menu of the display, pressing the AUTO-FOCUS button once will move the focus
carriage to the predetermined position as entered in the Manual Focus Position box under the System
Tab. While on the main menu of the display, holding the AUTO-FOCUS button for one second will move
the table up and down automatically in order to find the top surface of the material being engraved
fo