manualshive.com logo in svg

Universal Laser Systems PLS3.60, Руководство по безопасности, установке, эксплуатации и базовому обслуживанию


Поделиться
Скачать
background image

Notice

 

 

This publication and its contents are proprietary to Universal Laser Systems, Inc. (ULS), and are intended 
solely for the contractual use of ULS, Inc. customers. 
 
While reasonable efforts have been made to assure the accuracy of this manual, ULS shall not be liable 
for errors contained herein or for incidental or consequential damage in connection with the furnishing, 
performance, or use of this material.  ULS reserves the right to revise this manual and make changes 
from time to time without obligation by ULS to notify any person of such revision or changes. 
 
ULS does not assume any liability arising out of the application or use of any products, circuits, or 
software described herein.  Neither does it convey a license under its patent rights nor the patent rights of 
others. 
 
This publication and its contents may not be reproduced, copied, transmitted, or distributed in any form, 
or by any means, radio, electronic, mechanical, photocopying, scanning, facsimile, or otherwise, or for 
any other purpose, without the prior written permission of ULS. 
 
ULS provides no warranties whatsoever on any software used in connection with a ULS Laser Engraving 
System, express or implied. Neither does it guarantee software compatibility with any off-the-shelf 
software package or any software program that has not been written by ULS. 
 
Intended use of this system must be followed within the guidelines of this manual.  In no event will ULS 
be liable for any damages caused, in whole or in part, by customer, or for any economic loss, physical 
injury, lost revenue, lost profits, lost savings or other indirect, incidental, special or consequential 
damages incurred by any person, even if ULS has been advised of the possibility of such damages or 
claims. 
 

WARNING: UNIVERSAL LASER SYSTEMS PRODUCTS ARE NOT DESIGNED, TESTED, INTENDED OR 
AUTHORIZED FOR USE IN ANY MEDICAL APPLICATIONS, SURGICAL APPLICATIONS, MEDICAL DEVICE 
MANUFACTURING, OR ANY SIMILAR PROCEDURE OR PROCESS REQUIRING APPROVAL, TESTING, OR 
CERTIFICATION BY THE UNITED STATES FOOD AND DRUG ADMINISTRATION OR OTHER SIMILAR 
GOVERNMENTAL ENTITIES.

  SHOULD THE BUYER USE UNIVERSAL LASER SYSTEMS PRODUCTS FOR ANY 

SUCH UNINTENDED OR UNAUTHORIZED APPLICATION, ALL WARRANTIES REGARDING THE UNIVERSAL 
LASER SYSTEMS PRODUCTS SHALL BE NULL AND VOID.  FURTHER, THE BUYER SHALL HAVE NO REMEDY 
AGAINST UNIVERSAL LASER SYSTEMS AND ITS OFFICERS, EMPLOYEES, SUBSIDIARIES, AFFILIATES AND 
DISTRIBUTORS FOR, AND THE BUYER SHALL INDEMNIFY AND HOLD THOSE PARTIES HARMLESS 
AGAINST, ANY AND ALL CLAIMS, COSTS, DAMAGES, EXPENSES AND REASONABLE ATTORNEY FEES 
ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM ASSOCIATED WITH SUCH UNINTENDED OR 
UNAUTHORIZED USE, INCLUDING BUT NOT LIMITED TO ANY CLAIM BASED ON WARRANTY (EXPRESS OR 
IMPLIED), CONTRACT, TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED NEGLIGENCE), STRICT LIABILITY, 
PATENT OR COPYRIGHT INFRINGEMENT OR MISAPPROPRIATION OF INTELLECTUAL PROPERTY. 

 
HP is a registered trademark of Hewlett-Packard Corporation. 
Windows is a registered trademark of Microsoft Corporation. 
Macintosh is a registered trademark of Apple Computer Corporation. 
PostScript, Photoshop, and Streamline are registered trademarks of Adobe Systems Inc. 
CorelDRAW is a registered trademark of Corel Corporation. 
AutoCAD is a registered trademark of AutoDesk Inc. 
 

ULS Platforms are protected under one or more of U.S. patents 
5,661,746; 5,754,575; 5,867,517; 5,881,087; 5,894,493; 5,901,167; 
5,982,803; 6,181,719; 6,313,433; 6,342,687; 6,423,925; 6,424,670; 
6,983,001, D517,474; 7,060,934. Other U.S. and International patents 
pending. 

 

© Universal Laser Systems Inc., 2007 

All Rights Reserved 

Содержание PLS3.60





















































































































Отзывы:

Нет отзывов

Похожие инструкции для PLS3.60

Бренды по названию

Популярные бренды

Загрузить еще бренды