manualshive.com logo in svg

Universal Laser Systems PLS3.60, Руководство по безопасности, установке, эксплуатации и базовому обслуживанию


Поделиться
Скачать
background image

 

 

Section 1 

 

Safety 

 
 

Description of Appropriate Use 

This device is designed for laser cutting and engraving, in a laboratory, workshop, or light duty 
manufacturing environment.  Materials to be processed must fit completely inside the system for proper 
operation. 
 

Notice: This device is not designed, tested, intended or 
authorized for use in any medical applications, surgical 
applications, medical device manufacturing, or any similar 
procedure or process requiring approval, testing, or certification 
by the United States Food and Drug Administration or other 
similar governmental entities. Please see the Notice herein for 
further information regarding such uses.

 

 
 

General Safety 

Use of the equipment in a manner other than what is described in this manual can result in injury to 
yourself, others, or may cause severe damage to the equipment and your facility.  Failure to follow the 
operational requirements and safety guidelines, listed in this manual, may increase this risk. 
 
 

•

 

EXPOSURE TO THE LASER BEAM MAY CAUSE PHYSICAL 
BURNS AND CAN CAUSE SEVERE EYE DAMAGE.  

Proper 

use and care of this system are essential to safe operation. 

 
 

•

 

NEVER OPERATE THE LASER SYSTEM WITHOUT 
CONSTANT SUPERVISION OF THE CUTTING AND 
ETCHING PROCESS.  

Exposure to the laser beam may 

cause ignition of combustible materials and start a fire.  A 
properly maintained fire extinguisher should be kept on hand 
at all times. 

 

•

 

NEVER LEAVE MATERIALS IN THE LASER SYSTEM AFTER 
LASER PROCESSING HAS FINISHED.

  Materials may ignite 

after laser processing has finished.  Thoroughly inspect the 
interior of the laser system and remove any particulate materials 
before leaving the workstation.  A properly maintained fire 
extinguisher should be kept on hand at all times. 

 

•

 

A PROPERLY CONFIGURED, INSTALLED, MAINTAINED, AND OPERATING 
PARTICULATE/FUME EXHAUST SYSTEM IS MANDATORY WHEN OPERATING 
THE LASER SYSTEM.

  Fumes and smoke from the engraving process must be 

extracted from the laser system and exhausted outside. 

 
 

Содержание PLS3.60





















































































































Отзывы:

Нет отзывов

Похожие инструкции для PLS3.60

Бренды по названию

Популярные бренды

Загрузить еще бренды