Universal Laser Systems PLS3.60, Руководство по безопасности, установке, эксплуатации и базовому обслуживанию

Страница: 62 / 116

BASIC SYSTEM FEATURES
Section 6-4
Focus View (drop down list)
•
The focus button gives you the
opportunity to move the focus carriage to
a desired position on the laser systems
table. To have a full range of motion of
the X-Axis arm verify that you are zoomed
out in the preview window by right-clicking
on the mouse before entering the manual
d vertical and horizontal
terminates focus feature and re-home’s the
and the focus carriage will move to the
specified location.
focus window.
o
Moving the cursor over the preview
window once the focus button has
been clicked, changes your cursor to a blue target with dashe
lines. Clicking once on the preview window moves the focus
carriage to that position. Selecting another feature from the
drop down list
focus carriage.
o
To move the focus carriage to a specific location, click the GO
button near the bottom right hand corner. The Focus window
will appear. Type in the X and Y coordinates. Once you have
finished typing in the coordinate’s press the GO button within
the focus window
Estimate View (drop down list)
The “estimate” feature approximately calculates the amount of time it will take
the PLS to finish the engraving or vector cutting job. The more complex the
ngraving job is the longer it will take to finish and visa versa. e
Relocate View
(drop down list)
If after sending the print job from your graphics
program to the UCP you decide you want to
engrave it in another location within the
engraving field this feature gives you the
opportunity to move the graphic within the
asic view screen.
asic view screen. The current anchor point selected, in blue, is the axis of movement.
n the original coordinates in case you would like to reposition the
raphic in its original location.
n click on any anchor point available to move the graphic within the basic view
area.
b
When this feature is activated the image is
surrounded with 9 small white squares (anchor
points) and allows you to move it around the
b
We recommend you write dow
g
Relocation Types
1. You ca