Trumpf TruSystem 7000, Руководство по обслуживанию

Страница: 286 / 306

Troubleshooting
286
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
32 Troubleshooting
Error Possible cause Correction
Operation via the column
keyboard not possible. No
indicators light on the column
keypad.
Batteries exhausted. Connect to power using line
power cable.
Column keypad is not connected
correctly to the circuit board.
Check cable position and
connections and establish
connections as needed.
Column controller is defective. Check the column controller
through the CAN test center.
Replace column controller.
The column keypad is defective. Replace column keypad.
Cannot operate via remote
control
The connection socket is not
connected correctly to the motor
controller circuit board.
Check cable position and
connections and establish
connections as needed.
Connector socket is defective. Connect the remote control to
another connection socket and
test operation. Replace connector
socket.
Motor controller circuit board is
defective.
Check the motor controller circuit
board using the CAN test center.
Replace motor controller circuit
board.
Remote control is defective. Switch on the operating table and
activate the remote control. The
display must light after 10
seconds. If not, replace the
remote control.
Audible signals do not sound. The loudspeaker is not connected
correctly to the column controller.
Check cable position and
connections and establish
connections as needed.
Column controller is defective. Check the column controller
through the CAN test center.
Replace column controller.
Speaker is defective. Replace speaker.