Trumpf TruSystem 7000, Руководство по обслуживанию

Страница: 243 / 306

Cable W154
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
243
8. Unplug cable W154 [4] from the button [5].
9. Unplug the other end of cable W154 from the fuse holder [6].
10. Note the cable routing and attachment.
Unfasten cable W154 [4] from the button [5] up to the fuse
holder [6] and remove cable W154.
Assembly 1. Restore the original cable routing.
Route cable W154 in the table base.
2. Plug the plug of cable W154 into the fuse holder (see circuit
diagram on page 295).
3. Plug the plug at the other end of cable W154 into the button
(see circuit diagram on page 295).
4. Refasten cable W154 from the button up to the fuse holder.
5. Mount the cover above the control module (4 screws).
6. Safety note: The operating table is extremely heavy; take extra
care not to strain your back while righting it. A second person
is needed to right the operating table. Clear the floor in front
of the operating table and clean it if necessary. Right the
operating table with the help of a second person.
7. Remove the multifunction tool.
8. Remove the toothed wheel.
9. Establish the internal power supply, close the column cover
and turn on the operating table (see chapter 10 on page 33).
10. Lock operating table (brake)
11. Put on the pad.
TEST
Perform recheck according to IEC 60601-1; perform function test
and final check.