Trumpf TruSystem 7000, Руководство по обслуживанию

Страница: 231 / 306

Option B
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
231
board can be accessed through the opening in the mounting
plate.
Assembly 1. Insert the cable adapter plug into the ISM module socket.
2. Pull the cable adapter [1] straight up and secure to the cable
holder [3] (with Trendelenburg cable power sensor). Ensure
that the cable adapter can move in a straight direction.
3. Restore the original cable routing.
Turn the cable adapter [1] between the upper attachment
point [3] and the opening [4] in the middle cabinet by 180°,
and then plug in the plug from below in the socket of the motor
controller circuit board.
4. Secure the cable adapter [1] with a cable tie [5] on the ISM
module [2].
6. Mount the bellows on the frame (see chapter 9 on page 31).
7. Establish the internal power supply, close the column cover
and turn on the operating table (see chapter 10 on page 33).
8. Put on the pad.
9. Update the software (see the software description from the
CAN test center).
5.
TEST
Perform a function test.
Check position of cable. The cable adapter must not hang too
loose or be stretched too taut between the upper attachment
point (mounting plate) and the ISM module.
TEST
Perform recheck according to IEC 60601-1; perform function test
and final check.