Trumpf TruSystem 7000, Руководство по обслуживанию

Страница: 79 / 306

Frame (connection ring)
Service Manual TruSystem 7000 Operating Table – 1 764 986 – 10/2016
79
8. Attach the pad plate to the seat section bars (see chapter 12.2
on page 40).
9. Establish the internal power supply, close the column cover
and turn on the operating table (see chapter 10 on page 33).
10. Put on the pad.
14.4 Frame (connection ring)
Disassembly 1. Prepare the operating table (see chapter 7 on page 29).
2. Switch off the operating table and disconnect the internal
power supply (see chapter 10 on page 33).
3. Grasp the column cover, remove the holding screw from the
Trendelenburg assembly and guide the cover carefully
downward.
4. Open the column cover at the top and slide it down (see
chapter 9 on page 31).
5. Remove the metal panel with the column keypad (see
chapter 14.2 on page 77).
6. Separate the frame pieces [1]/[2] from one another (2
screws [3] from below).
7. Note the original installation position of the frame parts.
Remove the complete frame (connection ring with connection
plate bracket and slider plate) from the drive assembly [4] (2
screws each with washers).
TEST
Perform a function test.