Tokyo Keiki KRG-10, Руководство пользователя

Страница: 83 / 200

6-8
6.1.9 Menus
It is possible to switch menus using the menu bar, menu selection panel (button / tree), or tab
operations. The menu structure and the contents of each menu are shown in the following table.
Table 6.1.1 Structure and content of the basic menu
Basic menu
[Menu] [Tab] [Content]
Table 6.1.2 Structure and content of other menus
Other menus
[Menu] [Content]
Config
Basic Setting
Calc. Volume
Calc. Flow
Analog Current Output
Advance
Measurement Support
Outlier Removal
Tracking
Calibration
Analog
Level
Check
Echo Viewer
Measure
Tools
Reset
Error
Reading basic setting parameters from the device and writing
basic parameters to the device.
Basic settings, volume calculation settings and flow rate
calculation settings.
Reading volume calculation parameters from the device and
writing volume calculation parameters to the device.
Reading flow rate calculation parameters from the device and
writing flow rate calculation parameters to the device.
Reading analog current output parameters from the device and
writing analog current output parameters to the device.
Measurement support settings, outlier removal settings, and
tracking settings.
Reading measurement support parameters from the device and
writing measurement support parameters to the device.
Reading outlier removal parameters from the device and writing
outlier removal parameters to the device.
Reading tracking parameters from the device and writing
tracking parameters to the device.
Analog settings, level settings and checks.
Reading analog parameters from the device and writing analog
parameters to the device.
Reading level parameters from the device and writing level
parameters to the device.
Current loop check and table check.
Reading the fixed echo from the device, writing the fixed echo
to the device and general operations of the echo curve.
Reading the echo list from the device, reading the maximum
value from the device and general operations of measurement.
Reset and errors.
Executing the device reset.
Reading the device status.
Device Connection
Language Setting
Help
Connecting to the equipment and disconnecting from the
equipment.
Setting the display language.
Referencing Help.
Application
Auto configuration parameters depend on installation
environment and purpose of use.